Overall inspection of unit |
Inspect and adjust glass and seal |
Inspect firebox for signs of corrosion, cracking and integrity |
Inspect burner |
Inspect vent and termination |
Clean pilot assembly |
Clean main burner assembly |
Clean firebox and glass |
Vacuum unit |
Set and adjust primary air, pilot light and manifold gas pressure |
Check electrical connections |
Clean and adjust fan and controls |
Leak test all gas fittings |
Reconstruct ember bed |
Check log positioning |
Check 100% safety shut-off mechanism |
Check integrity of venting and firebox system |
Check flame and burn characteristics |
Check flame control, thermostat, and switch circuit |
Operational test once service complete |